When polyaluminium chloride is affected by moisture, will it affect the use effect?
Polyaluminum chloride manufacturersIt plays an important role in the water treatment industry, and its productionPolyaluminum chloride manufacturersIn the process of water treatment, it has the effect of flocculation and precipitation, which can effectively remove all kinds of pollutants contained in sewage, and can also play a good effect of sterilization and removal of radioactive substances.
Although polyaluminum chloride is a flocculant for water treatment, its particles are relatively dry and abundant due to its high alumina content. Therefore, it is easy to absorb moisture, and many customers worry that they will lose their effect after being affected with moisture.
In fact, it is true,Polyaluminum chloride manufacturersIt is pointed out that when it is affected by moisture, it will not only affect the use effect, but also cause inconvenience during use, because the agglomeration of the product is not easy to dissolve. Therefore, in addition to worrying about the effect, more crushing work needs to be done. Therefore, polyaluminium chloride manufacturers remind everyone that polyaluminium chloride must be ventilated and dry during storage to prevent moisture.
What if polyaluminium chloride gets wet? Although the water treatment effect will be affected by the moisture of polyaluminum chloride, the moisture status should be considered and it should not be thrown away blindly. One method is to take a small amount of polyaluminum chloride affected by water, and then increase the amount in a beaker and fully stir for testing to observe the state of vanadium flowers after flocculation. Vanadium flowers exist, flocculation speed is fast, the application effect is good, and the dosage can be increased during the application. At the same time, it is recommended to use during dilution15% of the concentration ratio to extend the stirring time. This can not only reduce economic losses, but also have a great impact on the use of polyaluminum chloride.
ProfessionalPolyaluminum chloride manufacturersThe production of high-quality polyaluminium chloride content is sufficient, and the particles are dried evenly. The packaging adopts double-layer woven bag, the inner layer is thickened plastic film, and the outer layer is thickened woven bag covered with plastic film. To a greater extent to reduce damage, avoid moisture.
In addition, polyaluminium chloride should be stored in a cool and dry warehouse to prevent exposure to sunlight and rain. It is strictly prohibited to store with flammable, corrosive and toxic substances.
More information
