Drinking water grade polyaluminum chloride use points
As a manufacturer of polyaluminium chloride, Xiaobian often noticed that after customers bought drinking water grade polyaluminium chloride, the water purification effect did not meet the test expectations in the factory after use. In-depth study of the reasons, Xiaobian believes that this is probably because the customer did not correctly use drinking water grade polyaluminum chloride or did not pay attention to some points in the use of drinking water grade polyaluminum chloride. In order for our customers not to spend money in vain, but also for the reputation of the company's products, Xiaobian today gives you a brief introduction to the main points of use of drinking water grade polyaluminum chloride:
After customers purchase high-quality drinking water-grade polyaluminum chloride, drinking water-grade polyaluminum chloride has been encountering these problems, but the use effect is not very good. Due to drinking water grade polyaluminium chloride, it cannot be used correctly.
First of all, customers should conduct small-scale tests before using drinking water grade polyaluminum chloride according to their sewage treatment methods, and usually configure drinking water grade polyaluminum chloride aqueous solution with a concentration of 2% to 5% for experiments.
Secondly, according to the relevant data obtained from the small-scale test, the amount of drinking water grade polyaluminum chloride in the actual production is calculated, and then a large amount of drinking water grade polyaluminum chloride is added.
Third, when adding drinking water grade polyaluminum chloride, the capacity of drinking water grade polyaluminum chloride should be adjusted according to the size of alum in the sewage.
In most cases, customers are in poor condition in the first stage of the small test, so accurate small tests cannot be performed. At this time, sewage samples and drinking water-grade polyaluminum chloride products can be sent to an authorized third-party testing agency for small-scale testing, thereby increasing reasonable use methods.
In the future, everyone must use drinking water grade polyaluminum chloride according to what Xiaobian said! This will certainly be able to receive a better water purification effect.
More information
