Product Name: New Compound Carbon Source Supplement

Main raw materials: 

1. Polyols

2. Fatty acids and their derivatives

3. Polysaccharides

Denitrification mechanism: The addition of carbon source supplements can adjust the carbon-nitrogen ratio of sewage, thereby increasing the denitrification rate, increasing the total nitrogen removal rate, and making the effluent meet the discharge standard.

Performance and characteristics:

1. The product is friendly to microorganisms and can be directly absorbed and utilized by bacteria through penetration. It is suitable for a wide range of bacteria, strong impact resistance, and short time for cultivating dominant bacteria.

2. The product combines the advantages of traditional carbon sources, and there will be no problems such as sludge bulking and difficulty in sludge pressure filtration after long-term use.

3. The product denitrification rate is high, and the applicable temperature range is wide.

4. The main raw materials of the product are green plant extracts, environmentally friendly and harmless, and do not belong to dangerous goods.

5. The pH value of the product is wide, and the pH value of the product can be adjusted according to different water quality, and the effect on the pH value of the effluent is low.

6. The product is simple to use and cost-effective than traditional carbon sources.

Best application areas:

1. Urban domestic sewage

2. Aquaculture sewage

3. slaughterhouse sewage

Use methods and precautions:

In order to achieve the best treatment effect and the most economic benefits, before the application of this product, the best dosage should be determined through quantitative simulation test, and then in the production debugging.

1. This product should be diluted before use. According to the water quality and treatment process, the dilution concentration is10% ~ 50%, to ensure normal operation.

2. The specific dosage is determined according to the nature of the water body being treated and the effluent requirements, and is generally removed.The dosage of 1mg total nitrogen was 10mg ~ 25mg.

3. The best point of carbon source supplement is at the inlet of anoxic tank. According to the situation of on-site process and facilities, the point of carbon source supplement can be set behind the fine grid, water distribution well, oxidation ditch water inlet, etc. to control the residence time of carbon source supplement in the system to ensure the denitrification rate of sewage.

Product indicators:         

Safety Technical Instructions

1 Product name and purpose

Product Name: New Compound Carbon Source Supplement

Product use: As a carbon source supplement for water treatment, regulate the nutritional balance of microorganisms and improve denitrification capacity.

Manufacturer: Guangxi Pingguo Fenghua Technology Co., Ltd.              Telephone:0776-5688689

2 Composition

3、Danger

The product is not flammable, non-toxic to the human body, no danger during use, according to the normal amount of the biochemical system of sewage treatment, non-toxic and harmless to microorganisms.

Potential health effects on humans:

Ingestion: Prohibition of large amounts of food

Inhalation: Large amounts of inhalation can cause respiratory irritation, need to wear a mask

Skin contact: Skin contact may cause slight irritation. Necessary PPE should be worn.

Glasses contact: Long-term contact with eyes may cause slight irritation. Wear protective glasses.

4、first aid measures

Ingestion: Gargle, seek medical attention immediately if you feel unwell

Inhalation: as soon as possible away from the source of irritation, to the open area to breathe fresh air, feel unwell immediately seek medical attention

Skin contact: Use plenty of water to rinse, if inflamed, red and swollen, seek medical advice immediately.

Glasses contact: use plenty of water to rinse, if feel unwell immediately seek medical attention.

5. Fire protection measures

Flash point: meaningless

Burning point: meaningless

Explosion limit concentration: meaningless

Extinguishing agent: general sand, dry powder extinguishing agent.

Protection of fire fighters: Wear suitable fire protection gear and equipment

6. Emergency treatment of leakage

Personal protection: wear protective equipment, try not to directly contact the leaking liquid, ventilation on site to maintain air circulation, avoid inhalation and long-term exposure to large amounts of steam

Small amount of leakage: flush directly with water

Large amount of leakage: collect leakage fluid and lotion for centralized treatment

Preventive measures: emergency pool and cofferdam for leakage shall be provided.

7、Operation, disposal and storage

Operation requirements: wear labor protection articles and take safety protection measures.

Storage requirements: keep clean, ventilated and cool, sunscreen and fire prevention, and prohibit storage with toxic, harmful, corrosive and oxidizing items.

Packaging requirements: the use of plastic and other anti-corrosion materials storage

8,physical and chemical properties

9,Stability and Reactivity

10,Transportation Information